Oracle Vm Virtualbox 32 Bit Windows 10

This tutorial will show you step by step what to do when VirtualBox is only showing 32-bit and no 64-bit versions of operating systems as options while creating a new virtual machine.

Windows 10 Pro Host 64-bit only supports 32-bit OS. Reported by: jesusemarquezz: Owned by: Component: other: Version: VirtualBox 5.2.22: Keywords: Cc: Guest type: all: Host type: all: Description I already checked in the BIOS and I have the intel virtual technology option enabled, what additional information do you need to help me with this. VirtualBox not showing 64 bit Windows 10 The reasons why you might experience this issue are quite diverse and include several different elements. Since a lot of elevated and BIOS level elements are involved during virtualization (Hyper-V, Hypervisor, Hardware security etc.), it might be possible that you have some options not configured properly.

Note: This may be obvious for most of you, but your host operating system should be 64-bit to run 64-bit guest operating systems in VirtualBox.

You have now converted your physical Windows 10 UEFI device to an Oracle VirtualBox VM. Below I have added a reference to doing this in Hyper-V, which is part of what I followed to create the above guide. I have also added a reference to licensing requirements as suggested by a comment.

If VirtualBox has no 64-bit option on Windows 10, then you can try the solutions on this page to fix the problem.

Methods:

My experience with this problem

I experienced the same problem while trying to install a 64-bit version of Linux Mint inside VirtualBox.

I opened VirtualBox, clicked on NEW, entered a name for the virtual machine, choose the type of operating system, but when I wanted to choose a version, I only saw 32-bit versions and NO 64-bit versions as an option.

But:

Fortunately, I found a simple solution online and on this page, I will share that solution with you.

Note! Your host operating system (OS installed on your PC) must be 64-bit.

I was using a 64-bit version of Microsoft Windows 10 Pro while creating this tutorial.

Make sure that “Intel Virtualization Technology” and “VT-d” are enabled

Enter BIOS settings and check if “Intel Virtualization Technology” and “VT-d” are enabled.

The following steps may be slightly different on your computer.

1. Start (or restart) your PC.

2. Press the right keyboard key to enter the BIOS setup. This must be done before Windows starts, so it's best to press the key a few times directly after you start your PC.

The exact key or key combination depends on your computer manufacturer and model.

Common keys to enter the BIOS are F1, F2, F10, DEL, and ESC.

3. Look for the following settings Intel Virtualization Technology and VT-d.

4. Make sure that they're both enabled.

5. If you made changes, then you must save the settings.

Windows 10 (host) must be a 64-bit operating system

To check if your Windows 10 is a 64-bit operating system, press the [Windows] + [pause] keyboard keys.

At System type (located under System), you should see something like 64-bit Operating System, x64-based processor.

Hyper-V must be disabled

Hyper-V is Microsoft's hardware virtualization product.

It lets you create and run virtual machines (like VirtualBox).

But:

Many third-party virtualization applications (including VirtualBox) do not work together with Hyper-V.

That's why you must make sure that Hyper-V is disabled.

To check if Hyper-V is disabled, follow the following steps:

1. Right-click on the Windows start menu button.

2. Click on Run.

3. Enter optionalfeatures.exe in the Run window.

4. Click on OK or press Enter.

Windows

The Windows Features window will appear.

5. Check if the Hyper-V option is unchecked.

6. If the Hyper-V option unchecked (like in the screenshot above), then you can close the Windows Features window.

But:

If the option is checked, then you will need to uncheck it and then click on OK.

If you want to be 100% sure that Hyper-v is disabled then follow these steps:

1. Right-click on the Windows start menu button.

2. Click on Command Prompt (Admin).

3. Enter the following command:

4. Press Enter.

5. After the command is finished, you will need to power down and reboot your PC.

Solution 1: Repair VirtualBox installation

1. Right-click on the installer file (the one you used to install VirtualBox) and choose Run as administrator.

If you don't have the installer file anymore, then you will need to download it from the VirtualBox website (www.virtualbox.org). The installer file must be the same version as the version of VirtualBox that's installed on your computer.

2. When the Windows User Account Control window appears, you click Yes.

Note: You might need to enter an administrator password in the User Account Control window and then click Yes.

A setup window will appear.

3. Click on Next.

4. Click on the Repair icon.

5. Click on Repair located at the bottom right.

VirtualBox will now start the repairing process. This will only take a few seconds.

6. After the repair process is finished, you click on Finish.

VirtualBox may ask you to restart your PC.

Hopefully, this simple solution will solve your problem.

Solution 2: Disable “Memory integrity” in Windows 10

1. Open Windows Security.

2. Click on Device security.

3. Under Core isolation, you click on Core isolation details.

4. Make sure that Memory integrity is turned off.

If Memory integrity was enabled and you just disabled it, then you may need to restart your PC.

Hopefully, this simple solution will solve your problem.

☕ Buy me a coffee

Maybe you're also interested in:

Hi,
I recently upgraded my Windows 10 Insider host machine through latest Windows version (where the build number is: 20226 (DEV)).
My Oracle MV VirtualBox is updated to the latest version 6.1.14r140239.
When I try to start a VM (where the virtual machine is Windows Server 2019... and it was working fine before). The virtual BIOS start fine, I see half second the Windows logo during boot and my 'HOST' machine get a bluescreen of the death (Now it's a greenscreen) and the error is: UNEXPECTED_KERNEL_MODE_TRAP.
It seem something is incompatible between new Windows 10 version and Oracle VM VirtualBox ?!?
Then I tried to start a brand new VM from scratch. Blank VM disk, insert DVD (ISO) to install Windows Server 2019... Same problem ! When the ISO try to load WS2019 my host crash on a bluescreen !
My host machine:
8 Go RAM

Virtualbox Download For Windows 11


120 Go SSD + 500 GB HDD
Windows 10 Pro Insider Dev Channel (Build: 20226)

Download Vmware Virtualbox

-----------------------
Please help me if someone known how to fix it ? Does it possible this is a known issue and a beta version of Oracle VM VirtualBox may help me ?